Solutions are configured as central, local or mobile.
- Strong, bad odors from the fluids in your plant?
- Hard to breathe?
- Illnesses?
- Once again you need to top up, replace and dispose of coolant?
No more!
Our solutions are designed to prevent this and improve the situation. At ITL we take the treatment of your coolants seriously, to save you costs and maintain a proper environment.

Systems are an outcome of years of experience and R&D in Industrial Filtration.
Small-footprint units can serve as a stationary local/central recycling system or as a mobile skid-mounted system. For standard machining applications, the recommended solution is the ABWD series – an automatic backwash drum for recycling.
Where sludge and fine particles are involved (grinding, composites), the HMR series – hydrostatic media recycling – is recommended.

Central off-line coolant recycling systems: OFF-LINE
The system is installed near the machines or in the waste room (distance is not an obstacle). Coolant is pumped continuously (by two main suction pumps, one running and one on standby, located at the end of the piping near the filter) from one or several machines at a time (via a friendly, programmable HMI), filtered of solid particles, cleaned of tramp oil, treated with ozone against bacteria and returned to the tanks of the same machine or machines to keep a proper coolant level. Because the process is "off-line", machine productivity is not affected.

On the filter, an automatic top-up device connected to the plant's RO system and emulsion preparation system maintains the correct emulsion concentration.
The coolant piping can be installed overhead or in the floor, depending on the plant.
In the machines' existing tanks we install a high/low level sensor and two automatic valves – one on the used-coolant suction line and the other on the clean-coolant return line.
The shape, size and appearance of the piping vary from one application to another.
Because the unit is an off-line system, flow rate and coolant tank capacity are not an issue. The main idea is to periodically treat each machine by replacing used coolant, refilling with clean recycled coolant, filtering the fluid including flushing the piping to prevent solids from settling, and moving on to the next machine. This way, all machine tanks are recycled several times a day.
The systems are modular and vary according to the application and requirements. The systems include::
• Drum filter module with automatic backwash.
• Automatic backwash unit that uses clean fluid to remove fine particles from the filter.
• Filtration levels of 25–40 microns
• Waste is discharged into a disposable or washable bag filter.
• Primary and secondary tramp-oil separation, ensuring 98–100% oil removal.
• Anti-bacterial ozone treatment.
• Full control of the machine tanks.
• Friendly HMI with parametric settings to suit each application.
• Maintenance-free system.
The HMR 2.0 sludge-removal module includes::
• Hydrostatic media filter.
• Filtration levels of 10–30 microns.
• Fine particles are trapped in the media and removed from the system into a collection bin.
• Media sensor that periodically signals when the media needs replacing.
• Primary and secondary tramp-oil separation, ensuring 98–100% oil removal.
• Anti-bacterial ozone treatment.
• Full control of the machine tanks.
• Friendly HMI with parametric settings to suit each application.
• Minimal maintenance (periodic media replacement only).

Benefits:
- The system is designed to filter a range of water-based coolants, industrial wastewater and similar fluids.
- The system is a cost-effective solution for small and medium workshops.
- Various filtration levels between 10 and 40 microns.
- Various flow rates for treating large or small tanks.
- Machine tank level and concentration stay constant. The operator is free to work – no more monitoring needed.
- Systems with or without media.
- Minimal maintenance.
- Finish: RAL color painting or stainless steel construction.
- ITL provides a fully customized solution, including piping design and installation to fit the plant layout and constraints.
- ITL designs, manufactures and supplies coolant filtration solutions for: machine tools, grinding, wire cutting, honing, and the process industry.
- High pressure systems: machine tools, membrane filtration industry, others.
- Recycling of fluids and solids.
- Our system can be local, central or mobile, standard or custom-made.
- Our systems serve HNK, Okuma, Maho Dekel, Mori Seiki, Makino, Mazak, Doosan, Hass, Blohm, Rolomatic, Bridgeport, Michael Dekel and more.


We supply peripheral solutions such as pumps, chip conveyors, air filtration, chillers, sump cleaners, washing and degreasing systems, spare parts and consumables.